Google Translate
|
Uniseal Frequently Asked Questions
Merry Christmas and a Happy New Year. We are taking a short break at the Uniseal Shop to recharge our batteries over the festive period.
Normal working will resume when we can send out orders again on Friday 3rd January 2025. You will still be able to place orders but they will not be fulfilled
until we return. You can send us an email but we may not respond until our return unless we go online.
Questions and Answers about Uniseals.
If you have a question about Uniseals and their use contact me HERE I will add it into the Uniseal FAQ's. I am also interested to hear of how our customers have used Uniseals and could add some photos to the site.
Question |
I found a hole saw set on eBay that came from China will that be any good to make my holes for my Uniseals? |
| Answer |
An inexpensive hole saw should be OK to create your holes in plastic or plywood. Creating a decent hole in aluminium or mild steel would probably be impossible. The main criteria in creating your hole is that it is a good clean hole with no swarf. A really cheap hole saw may do the job just fine as long as the teeth on the holesaw remain sharp. On a cost per hole basis this would really keep the price down. There is every likelihood that you will not be able to cut dozens of holes though. Please remember when using a holesaw not to run the saw too quickly, the slower the better.
|
|
|
|
|
|
|
|
|
See all FAQS
|
Our latest additions 6 inch Uniseals, both sizes i.e. Uniseals U600 and Uniseals U600 SDR-35, are now part of our stock holding. We only have a small number in stock so drop us an email or give us a call if you require some.
We have just launched our Flexseal EPDM Plumbing Range pipe connector products. We are stocking the complete Flexseal plumbing range. We also have an advert on eBay selling the product. Checkout the menu on the left of the page.
Call 07484 171458 for prices.
|
 |
